2 piece trunnion mounted ball valve

3 piece trunnion mounted ball valve

top entry trunnion mounted ball valve

robinet à tournant sphérique monté sur tourillon

trunnion mounted ball valve catalogue

conception de robinet à tournant sphérique monté sur tourillon

fournisseur de robinets à tournant sphérique montés sur tourillon

virgo trunnion mounted ball valve

Robinet à bille à tourillon 3 pièces 8″-150LB

Robinet à bille à tourillon 3 pièces 8″-150LB

Valve Type Three-Piece Trunnion Mounted Ball Valve
Body Type Three-Piece Bolted Body (Split Body)
Ball Support Trunnion Mounted (Fixed Ball)
End Connection Flanged, Raised Face (RF)
Nominal Size NPS 8 (DN200)
Pressure Class Class 150
Body Material A105 (Carbon Steel)
Service Medium Water / Oil / Gas / General Purpose
Operation Gearbox with Handwheel (Std.) / Actuator ready

  • aboutimg3
  • aboutimg4
  • aboutimg5

 

Description

FICHE TECHNIQUE

Three-Piece Trunnion Mounted Ball Valve

  1. BASIC VALVE INFORMATION

Article

Spécification

Type de vanne

Three-Piece Trunnion Mounted Ball Valve

Body Type

Three-Piece Bolted Body (Split Body)

Ball Support

Trunnion Mounted (Fixed Ball)

Terminer la connexion

Flanged, Raised Face (RF)

Taille nominale

NPS 8 (DN200)

Classe de pression

Classe 150

Matériau du corps

A105 (Carbon Steel)

Service Medium

Water / Oil / Gas / General Purpose

Opération

Gearbox with Handwheel (Std.) / Actuator ready

  1. APPLICABLE CODES & STANDARDS

Standard

Description

API6D

Specification for Pipeline and Piping Valves

ASME B16.34

Valve Flanged, Threaded, and Welding End Dimensions

ASME B16.5

Pipe Flanges and Flanged Fittings (Class 150 RF)

ASME B16.10

Face-to-Face and End-to-End Dimensions of Valves

API 598 / ISO 5208

Valve Inspection and Testing

NACE MR0175 / ISO 15156

Option: Sour Service (if required)

API 607 / ISO 10497

Option: Fire Safe Design (if required)

ISO 5211

Actuator Mounting Pad Dimensions

  1. MATERIALS OF CONSTRUCTION

Composant

Matériel

Standard / Remarks

Corps

A105

Carbon steel, forged

End Connectors

A105

Flanged ends, integral or welded

Balle

A105 + Chrome Plating / A182 F304/F316

Stainless steel / Hard chrome plated carbon steel

Siège

PTFE / Reinforced PTFE / Devlon

Self-lubricating, low torque

Tige

A182 F6a / 17-4PH / A182 F304

Stainless steel, anti-blowout design

Trunnion

A105 / Stainless Steel

Fixed support, double axial bearings

Joints de carrosserie

O-Ring (NBR/Viton) + Spiral Wound Gasket

Leak-proof design

Thrust Bearings

Stainless Steel + PTFE

Low friction, high load capacity

Verrouillage

A193 B7 / A194 2H

Stud bolts with heavy hex nuts

  1. DESIGN & PERFORMANCE CHARACTERISTICS

Paramètre

Spécification

Classe de pression

Classe 150

Max. Allowable Working Pressure

Per ASME B16.34, A105 @ 38°C: 285 psi (19.6 bar)

Design Temperature Range

-29°C to +200°C (-20°F to +400°F) (Seat material dependent)

Seat Leakage Rate

API 598 / ISO 5208 Rate A (Zero leakage)

Cavity Pressure Relief

Automatic relief via seat design (upstream/downstream)

Dispositif antistatique

Springs between ball/stem and body – per API 6D

Blowout-Proof Stem

Internally inserted, retained by shoulder

Conception ignifuge

Optional per API 607 / ISO 10497

Double blocage et purge (DBB)

Yes, per API 6D

Dispositif de verrouillage

Provided on gearbox / lever

  1. DIMENSIONS ET CONNEXIONS

Article

Dimension (inch / mm)

Flange Size & Type

8″ Class 150 RF per ASME B16.5

Longueur face à face

Per ASME B16.10 / API 6D – RF: 280 mm (11.02″)

Flange Drilling

ASME B16.5, 8″ 150LB – 8 bolt holes, 0.75″ dia.

Flange Raised Face Height

0.06″ (1.6 mm)

Ball Bore Diameter

Full bore / Standard bore (as per design)

Stem Diameter

Per ISO 5211 actuator mounting

Gearbox Type

Worm gear with handwheel, locking device

Approx. Weight

Approx. 80–100 kg (manufacturer dependent)

  1. TESTING & INSPECTION

Test

Standard / Requirement

Test de coque

API 598 / ISO 5208 – 1.5 x Rated Pressure

Seat Test (Low Pressure)

80 psi (5.5 bar) – Zero leakage

Seat Test (High Pressure)

1.1 x Rated Pressure – Zero leakage

Cavity Relief Test

Per API 6D

NDE Requirements

Visual, dimensional, PMI on A105 (optional)

Coating / Painting

Epoxy coating, color blue/silver (or as per spec)

  1. SPECIAL REQUIREMENTS & REMARKS
  1. Three-Piece Body Design
  • Body consists of center body + two end flanges, bolted together.
  • Allows easy maintenance, seat and ball replacement without removing valve from pipeline.
  • Trunnion Mounted Ball
    • Ball is fixed by trunnion shaft at bottom and top.
    • Suitable for low torque, high pressure, and large size applications.
    • Reduces seat wear and operating torque.
  • Material Traceability
    • All A105 pressure parts shall have full material traceability per EN 10204 3.1 or ASTM A105 certs.
  • NACE Compliance (Optional)
    • If sour service required, NACE MR0175 / ISO 15156 compliant materials to be used.
  • Actuator Mounting
    • ISO 5211 top flange prepared for future actuator mounting.
    • Stem extension provided for insulation (if required).

     

    GARANTIE:

    SAVVY VALVES s'engage à fournir une qualité de produit exceptionnelle et un service après-vente sans souci. Nos vannes sont garanties pour une durée de vie minimale de 12 mois, pendant laquelle nous fournirons gratuitement toutes les pièces de rechange nécessaires et les instructions de maintenance détaillées. Pendant la période de garantie, si des dommages non provoqués par l'homme se produisent, nous remplacerons les composants sans frais et fournirons une assistance technique professionnelle. Une fois la garantie expirée, les clients ne doivent payer que le coût des pièces de rechange, tout en bénéficiant de services de maintenance à prix réduit. Notre objectif est d'aider nos clients à réduire leurs coûts opérationnels et à améliorer l'efficacité de leur production grâce à une qualité fiable et à un service après-vente complet. Qu'il s'agisse de demandes techniques ou de besoins de maintenance, notre équipe d'experts répondra rapidement pour garantir que votre système de vannes maintient des performances optimales à tout moment.

     

    Si vous êtes intéressé par nos produits, vous pouvez choisir de laisser vos informations ici et nous vous contacterons sous peu.