china knife gate valve

vanne à guillotine

knife gate valve china

knife gate valve drawing

usine de vannes à guillotine

prix des vannes à guillotine

types de vannes à guillotine

vanne à guillotine manuelle

vanne à guillotine en acier inoxydable

Vanne à guillotine entièrement à crampons 316L

Vanne à guillotine entièrement à crampons 316L

Type de vanne Vanne à guillotine, corps à crampons, tige montante/tige non montante (à préciser)
Gamme de tailles DN50 – DN600 (2″ à 24″)
Pression nominale Classe 150 (compatible PN10/PN16)
Terminer la connexion Type à crampons (trous de boulons taraudés selon perçage ASME B16.5 classe 150)
Norme de conception MSS SP-81 / API 609 (Catégorie A)
Norme face à face MSS SP-81 (modèle court) / Norme du fabricant
Norme d'essai API 598 / MSS SP-81
Service Boues, pâtes et papiers, eaux usées, produits chimiques, mines, fluides corrosifs
Plage de température -20°C à +180°C (-4°F à +356°F) (limitation du siège en PTFE)

  • aboutimg3
  • aboutimg4
  • aboutimg5

 

Description

FICHE TECHNIQUE

Lugged Knife Gate Valve (Stainless Steel, PTFE Seat, Class 150)

  1. Informations générales

Article

Spécification

Type de vanne

Knife Gate Valve, Lugged Body, Rising Stem / Non-Rising Stem (Specify)

Gamme de tailles

DN50 – DN600 (2″ to 24″) 

Pression nominale

Class 150 (PN10/PN16 compatible)

Terminer la connexion

Lugged Type (Tapped bolt holes per ASME B16.5 Class 150 drilling)

Norme de conception

MSS SP-81 / API 609 (Category A)

Face to Face Standard

MSS SP-81 (Short pattern) / Manufacturer’s standard

Test Standard

API 598 / MSS SP-81

Service

Slurries, Pulp & Paper, Wastewater, Chemical, Mining, Corrosive Fluids

Plage de température

-20°C to +180°C (-4°F to +356°F) (PTFE seat limitation)

  1. Bill of Materials (Materials of Construction)

Part Name

Qty.

Matériel

Material Specification / Notes

Corps

1

Stainless Steel

ASTM A351 Grade CF8M (316) or CF3M (316L)

Gate (Blade)

1

Stainless Steel

ASTM A240 Type 316/316L, ground finish, beveled edge

Siège

1

PTFE

Virgin PTFE or Reinforced PTFE (glass/carbon filled)

Tige

1

Stainless Steel

ASTM A276 Type 316, anti-blowout design

Emballage

Set

PTFE / Graphite

Chevron / V-ring type, adjustable

Gland Follower

1

Stainless Steel

ASTM A351 CF8M

Yoke

1

Stainless Steel / Ductile Iron

Cast or fabricated

Bonnet / Cover

1

Stainless Steel

Optional, for pressure-containing designs

Bonnet Bolts

Set

Stainless Steel

ASTM A193 Grade B8

Bonnet Nuts

Set

Stainless Steel

ASTM A194 Grade 8

Handwheel / Operator

1

Cast Iron / Steel

With stainless steel stem nut

Name Plate

1

Stainless Steel

MSS SP-25 marking

Optional: Seat can be fully vulcanized or mechanically retained; packing live-loading available.

  1. Material Specifications & Rationale

Composant

Matériel

Rationale

Corps

CF8M (316 SS)

Excellent corrosion resistance in acidic, chloride, and industrial environments. Suitable for food, chemical, and marine applications.

Grille

316 SS

Ground finish reduces friction against PTFE seat; beveled edge cuts through slurry solids.

Siège

PTFE

Chemically inert, low friction, provides bubble-tight shut-off even with entrained solids. Resilient and self-cleaning.

Tige

316 SS

Anti-blowout shoulder, rolled threads for strength.

  1. Caractéristiques de conception

Fonctionnalité

Description

Lugged Body

Tapped bolt holes allow dead-end service or installation without nuts on one side; suitable for end-of-line or isolation applications.

Bidirectional Shut-Off

PTFE seat provides tight sealing in both directions.

Full Port

Unobstructed flow when fully open, minimizes pressure drop.

Self-Cleaning

Gate cuts through沉积物 during closure; seat design prevents solids buildup.

Tige anti-éruption

Stem retained by internal shoulder, cannot be ejected under pressure.

Replaceable Seat

Seat can be replaced without removing valve from line (in most designs).

Flange Drilling

Drilled per ASME B16.5 Class 150, compatible with PN10/PN16 flanges.

  1. Dimensional Data (Reference)

*Note: Face-to-face dimensions per MSS SP-81 (short pattern). Actual dimensions may vary by manufacturer.*

Size (NPS)

DN (mm)

Face-to-Face L (mm)

Height H (Open) (mm)

Handwheel Dia. (mm)

Bolt Circle Dia. (mm)

No. of Holes

Tapped Hole Depth (mm)

2″

50

48

350

200

120.7

4

18

3″

80

51

420

250

152.4

4

18

4″

100

57

500

280

190.5

8

20

6″

150

70

650

350

241.3

8

22

8″

200

76

800

400

298.5

8

22

10″

250

89

950

450

362.0

12

24

12″

300

102

1150

500

431.8

12

24

14″

350

114

1350

560

476.3

12

25

16″

400

127

1550

620

539.8

16

25

18″

450

140

1750

680

577.9

16

28

20″

500

152

1950

740

635.0

20

28

24″

600

178

2350

860

749.3

20

32

Notes:

  • L dimension is per MSS SP-81 (wafer short pattern). Lugged bodies may have slightly longer face-to-face; confirm with manufacturer.
  • Flange drilling per ASME B16.5 Class 150.
  • Tapped holes are typically UNC or metric threads; specify when ordering.
  1. Performance & Testing (Per API 598 / MSS SP-81)

Test

Medium

Pression

Critères d'acceptation

Shell (Body) Test

Eau

1.5 x Rated Pressure (3.0 MPa / 435 psi)

No visible leakage

Seat (Seal) Test

Eau

1.1 x Rated Pressure (2.2 MPa / 319 psi)

No visible leakage (Class VI optional)

Low Pressure Seat Test

Air / Nitrogen

0.6 MPa (87 psi)

Bubble-tight

Backseat Test

Water / Air

Rated Pressure

No leakage through packing when fully open

  1. Options d'actionnement

Operator Type

Disponibilité

Notes

Volant

Standard (≤12″)

Rising stem or non-rising stem

Bevel Gear

Optional (≥14″)

For easier operation on larger sizes

Pneumatic Actuator

Facultatif

Double-acting or spring-return

Electric Actuator

Facultatif

On-off or modulating

Hydraulic Actuator

Facultatif

For high thrust requirements

  1. Applications
  • Pâtes et papiers: Stock preparation, bleach plants, pulp mills
  • Mining: Tailings, slurries, thickener underflow
  • Wastewater: Raw sewage, sludge, grit channels
  • Chemical: Corrosive liquids, acids, caustics
  • Food & Beverage: Hygienic processing (with appropriate finish)
  • Power: Fly ash, limestone slurry
  1. Special Options

Option

Description

Metal Seat

For high temperature or abrasive services (replace PTFE with metal seat)

V-Seat / Shearing Gate

Modified gate for cutting fibrous materials

Live-Loaded Packing

Belleville springs maintain packing compression

Flush Ports

For purging or cleaning body cavity

Tige allongée

For buried or insulated service

Oxygen Cleaning

Degreased per CGA G-4.1 for oxygen service

  1. Marking & Documentation
  • Marking: Per MSS SP-25 (Size, Pressure Class, Material, Manufacturer’s Logo, Heat No.)
  • Standard Documentation:
    • Material Test Certificates (EN 10204 3.1)
    • Pressure Test Report
    • Certified Dimensional Drawing
    • Operation & Maintenance Manual
  • Optional Documentation:
    • PMI Test Report
    • NACE MR0175 Compliance
    • NDT Reports (RT, PT, MT)

Procurement Notes

  1. Size & Pressure Class: Confirm NPS and Class (150LB standard).
  2. Matériau du corps: CF8M (316SS) is standard; CF3M (316L) for welding applications.
  3. Seat Material: Virgin PTFE is standard; specify if reinforced PTFE or conductive PTFE required.
  4. Operator Type: Handwheel, gear, or actuated.
  5. Face à face: Confirm if MSS SP-81 short pattern is acceptable.
  6. Tapped Holes: Specify thread type (UNC or metric) if lugged connection.

*This technical data sheet complies with MSS SP-81 and ASME B16.34 requirements for knife gate valves.*

 

GARANTIE:

SAVVY VALVES s'engage à fournir une qualité de produit exceptionnelle et un service après-vente sans souci. Nos vannes sont garanties pour une durée de vie minimale de 12 mois, pendant laquelle nous fournirons gratuitement toutes les pièces de rechange nécessaires et les instructions de maintenance détaillées. Pendant la période de garantie, si des dommages non provoqués par l'homme se produisent, nous remplacerons les composants sans frais et fournirons une assistance technique professionnelle. Une fois la garantie expirée, les clients ne doivent payer que le coût des pièces de rechange, tout en bénéficiant de services de maintenance à prix réduit. Notre objectif est d'aider nos clients à réduire leurs coûts opérationnels et à améliorer l'efficacité de leur production grâce à une qualité fiable et à un service après-vente complet. Qu'il s'agisse de demandes techniques ou de besoins de maintenance, notre équipe d'experts répondra rapidement pour garantir que votre système de vannes maintient des performances optimales à tout moment.

 

Si vous êtes intéressé par nos produits, vous pouvez choisir de laisser vos informations ici et nous vous contacterons sous peu.