DIN Grilla Grills Bois Gril à granulés
fabricants de vannes à boisseau excentrique
fabricants de robinets à boisseau chemisé
fabricants de robinets à boisseau doublé
robinet à tournant sphérique
fabricants de vannes à boisseau chemisé
Valve Type Plug Valve, Cylindrical Plug, Low-Torque Design, Bottom Entry / Top Entry
Size Range 1″ – 4″ (DN25 – DN100)
Pressure Rating 2,000 psi – 15,000 psi (Up to 20,000 psi test)
End Connection Hammer Union (FIG 1502 / 1002 / 2002), Threaded (LP/TBG), Flanged (API 6A)
Design Standard API Spec 6A / NACE MR0175 / ISO 10423



Description
FICHE TECHNIQUE
API 6A Plug Valve (Halliburton Style)
|
Article |
Spécification |
|
Type de vanne |
Plug Valve, Cylindrical Plug, Low-Torque Design, Bottom Entry / Top Entry |
|
Gamme de tailles |
1″ – 4″ (DN25 – DN100) |
|
Pression nominale |
2,000 psi – 15,000 psi (Up to 20,000 psi test) |
|
Terminer la connexion |
Hammer Union (FIG 1502 / 1002 / 2002), Threaded (LP/TBG), Flanged (API 6A) |
|
Norme de conception |
API Spec 6A / NACE MR0175 / ISO 10423 |
|
Product Specification Level |
PSL1 – PSL3 (PSL2 typical) |
|
Performance Requirement |
PR1 – PR2 |
|
Classe de matériau |
AA – FF (DD/EE typical for sour service) |
|
Classe de température |
K (-60°C) to U (121°C); KU typical (-29°C to 121°C) |
|
Service |
Cementing, Fracturing, Acidizing, Well Service Flowlines, Manifold Trailers, Coil Tubing |
|
Opération |
90° Quarter-Turn, Low Torque |
|
Part Name |
Qty. |
Matériel |
Material Specification / Notes |
|
Corps |
1 |
Alloy Steel |
AISI 4130 / 4140, Forged, Heat Treated |
|
Plug / Cylindrical Core |
1 |
Stainless Steel |
316/316L SS (Standard); Monel / 17-4PH for sour service |
|
Inserts / Segments (Pair) |
2 |
Ductile Iron / Aluminum Bronze |
Tapered OD, Split design; Aluminum Bronze for sour/corrosive service |
|
O-Ring Seals (Inserts) |
2 |
Nitrile / Fluoroelastomer / PTFE |
90-durometer; Recessed in insert grooves |
|
Stem Seals / Packing |
Set |
Nitrile / Fluoroelastomer / PTFE+Inconel Spring |
Bonded to brass washers; Self-energized designs available |
|
Adjusting Nut |
1 |
Alloy Steel |
With O-ring seal |
|
Terminer les connexions |
2 |
Alloy Steel |
Hammer Union (FIG 1502, etc.), Threaded, or Flanged |
|
Grease Fitting |
1 |
Steel |
Giant Buttonhead Type |
|
Handle / Wrench |
1 |
Steel |
With operating bar sockets |
|
Gear Operator |
1 |
Steel |
For 3″ and larger valves (optional) |
|
Name Plate |
1 |
Stainless Steel |
Per API 6A / MSS SP-25 |
|
Fonctionnalité |
Description |
Benefit |
|
Cylindrical Plug Design |
Cylindrical (non-tapered) plug eliminates wedging action |
Prevents jamming under pressure; reduces operating torque |
|
Pressure-Balanced Plug |
Identical stem seals at both ends |
Eliminates need for thrust bearings; low torque even at 15,000 psi |
|
Split Inserts Design |
Inserts are parted into identical halves, tapered OD to match body cavity; ID precision ground to plug diameter |
Firm uniform clamping; easy adjustment; no lapping required |
|
Floating Plug & Inserts |
Assembly “floats” downstream under pressure |
Compensates for body deflection; seal improves with pressure |
|
Reduced Bearing Area |
Raised boss on inserts is only contact area |
Minimizes frictional forces; reduces operating torque |
|
In-Line Maintenance |
All parts replaceable with valve body left in line |
Minimal downtime; no special tools required |
|
Lubrication System |
Grease fitting with lubrication chambers above/below plug |
Dual function: lubricates and enhances sealing |
|
Metal-to-Metal + Elastomer Sealing |
Precision cylindrical fit + O-ring seals |
Reliable leak-proof operation under extreme conditions |
|
Composant |
Matériel |
Rationale |
|
Corps |
AISI 4130 Alloy Steel (Forged) |
Heat treated for high strength and durability in high-pressure service (up to 15,000 psi) |
|
Prise |
Stainless Steel (316/316L) |
Standard on every Lo-Torc valve; heat treated to resist galling and corrosion |
|
Monel / 316L SS (Sour Service) |
For H₂S environments per NACE MR0175 |
|
|
Inserts |
Ductile Iron / Cast Iron |
Standard for general fluid service (metal-to-metal sealing) |
|
Aluminum Bronze |
For sour/corrosive service |
|
|
Seals |
Nitrile (90-durometer) |
Standard service up to 121°C (250°F) |
|
Fluoroelastomer / PTFE |
For corrosive fluids / temperature extremes |
|
|
PTFE + Inconel Spring |
For highly corrosive media / extreme temperatures |
*Note: Based on Halliburton Lo-Torc specifications for 1502 Union connections . Dimensions are for reference only; verify with manufacturer drawing.*
|
Taille |
Terminer la connexion |
Working Pressure (psi) |
Test Pressure (psi) |
Face-to-Face L (mm/in) |
Height H (mm/in) |
Weight (kg/lbs) |
|
1″ × 2″ |
FIG 1502 M×F |
15,000 |
22,500 |
268 mm / 10.57″ |
185 mm / 6.59″ |
~18 kg / 40 lbs |
|
2″ × 2″ |
FIG 1502 M×F |
15,000 |
22,500 |
353 mm / 15.25″ |
225 mm / 8.05″ |
~35 kg / 77 lbs |
|
3″ × 3″ |
FIG 1502 M×F |
15,000 |
22,500 |
432 mm / 15.69″ |
254 mm / 14.27″ |
~68 kg / 150 lbs |
Flanged End Dimensions (API 6A Flanges):
|
Taille |
Pression |
Face-to-Face L (mm) |
Height H (mm) |
Notes |
|
2-1/16″ |
5,000 psi |
343 mm |
390 mm |
With gear operator |
|
3-1/16″ |
5,000 psi |
435 mm |
578 mm |
With gear operator |
|
4-1/16″ |
5,000 psi |
540 mm |
711 mm |
With gear operator |
Threaded End Dimensions (Female LP/TBG Threads):
|
Valve Size |
Pression |
Operating Torque (Nm/ft-lbs) |
Operator Type |
|
1″ |
15,000 psi |
40-60 Nm / 30-45 ft-lbs |
Handle / Wrench |
|
2″ |
15,000 psi |
135-200 Nm / 100-150 ft-lbs |
Handle / Wrench |
|
3″ |
15,000 psi |
340-475 Nm / 250-350 ft-lbs |
Gear Operator |
|
4″ |
5,000 psi |
475-610 Nm / 350-450 ft-lbs |
Gear Operator |
*Note: Even under 15,000 psi pressure, the Lo-Torc design enables easy operation due to pressure-balanced cylindrical plug .*
|
Type d'essai |
Medium |
Pression |
Critères d'acceptation |
|
Shell (Body) Test |
Eau |
1.5 x Rated Pressure |
No visible leakage through body |
|
High Pressure Seat Test |
Eau |
1.5 x Rated Pressure |
Per API 6A requirements |
|
Low Pressure Seat Test |
Air / Nitrogen |
0.6 MPa (87 psi) |
Bubble-tight |
|
Essai hydrostatique |
Eau |
Per API 6A |
Duration: Minimum 3 minutes |
|
Gas Test (Optional) |
Nitrogen |
Per customer spec |
For critical service applications |
For H₂S / Sour Gas Environments :
|
Composant |
Sour Service Material |
|
Prise |
Monel K500 / 316L Stainless Steel |
|
Inserts |
Aluminum Bronze |
|
Seals |
Fluoroelastomer (FKM) / PTFE |
|
Corps |
AISI 4130 with controlled hardness (HRC ≤ 22) |
|
Verrouillage |
ASTM A193 B7M / A194 2HM |
Temperature Rating for Sour Service:
|
Operator Type |
Disponibilité |
Application |
|
Manual Handle / Wrench |
1″ – 2″ valves (standard) |
Standard operation; operating bar sockets for leverage |
|
Gear Operator |
3″ and larger (standard); Optional for smaller sizes |
Required for larger valves; reduces operating effort |
|
Pneumatic Actuator |
All sizes (optional) |
Remote operation; fast response |
|
Hydraulic Actuator |
All sizes (optional) |
High thrust; ideal for automated manifolds |
|
Electric Actuator |
All sizes (optional) |
Remote control; precise positioning |
|
Valve Size |
Port Diameter (mm/in) |
Flow Coefficient Cv (approx) |
|
1″ |
25 mm / 1.0″ |
25-35 |
|
1-1/2″ |
38 mm / 1.5″ |
60-80 |
|
2″ |
51 mm / 2.0″ |
120-150 |
|
3″ |
76 mm / 3.0″ |
280-350 |
Suitable Applications
|
Application |
Description |
|
Cementing Operations |
High-pressure cement flow control during wellbore stabilization |
|
Fracturing Flowlines |
Control of fracturing fluids under extreme pressure |
|
Well Testing Flowlines |
Isolation and flow control during well testing |
|
Acidizing |
Corrosive acid treatment operations |
|
Coil Tubing |
Coiled tubing pressure control |
|
Manifold Trailers |
High-pressure manifold systems |
|
Sand Control |
Abrasive fluid handling (with aluminum bronze inserts) |
Not Suitable For
|
Fonctionnalité |
Description |
|
In-Line Maintenance |
All repairs performed with valve body left in line |
|
Parts Replacement |
Every part replaceable with standard parts; no factory return required |
|
Disassembly |
Remove only two capscrews, adjusting nut, and handle adapter |
|
Interchangeability |
100% interchangeable with Halliburton brand parts |
|
Repair Kits |
Available for all sizes and service types |
Valve Marking (Per API 6A / MSS SP-25)
Standard Documentation
Optional Documentation
Please confirm the following items when ordering:
|
Article |
Selection / Specification |
|
Valve Size |
[ ] 1″ [ ] 1-1/2″ [ ] 2″ [ ] 3″ [ ] 4″ [ ] Other: _____ |
|
Pression nominale |
[ ] 2,000 [ ] 3,000 [ ] 5,000 [ ] 10,000 [ ] 15,000 [ ] 20,000 psi |
|
Terminer la connexion |
[ ] FIG 1502 Union [ ] FIG 1002 Union [ ] FIG 2002 Union [ ] API Flange [ ] Threaded (LP/TBG) [ ] Custom: _____ |
|
End Configuration |
[ ] M × F [ ] F × F [ ] M × M |
|
Classe de matériau |
[ ] DD [ ] EE [ ] FF [ ] Other: _____ |
|
Classe de température |
[ ] KU (-29°C to 121°C) [ ] PL (-46°C) [ ] Other: _____ |
|
PSL Level |
[ ] PSL1 [ ] PSL2 [ ] PSL3 |
|
PR Level |
[ ] PR1 [ ] PR2 |
|
Sour Service (NACE) |
[ ] Yes [ ] No |
|
Operator Type |
[ ] Manual Handle [ ] Gear Operator [ ] Pneumatic [ ] Hydraulic [ ] Electric |
|
Service Medium |
_____ |
|
Special Cleaning |
[ ] Standard [ ] Oxygen Service [ ] No |
|
Certification |
[ ] Standard [ ] 3.1 [ ] 3.2 (Witnessed) |
GARANTIE:
SAVVY VALVES s'engage à fournir une qualité de produit exceptionnelle et un service après-vente sans souci. Nos vannes sont garanties pour une durée de vie minimale de 12 mois, pendant laquelle nous fournirons gratuitement toutes les pièces de rechange nécessaires et les instructions de maintenance détaillées. Pendant la période de garantie, si des dommages non provoqués par l'homme se produisent, nous remplacerons les composants sans frais et fournirons une assistance technique professionnelle. Une fois la garantie expirée, les clients ne doivent payer que le coût des pièces de rechange, tout en bénéficiant de services de maintenance à prix réduit. Notre objectif est d'aider nos clients à réduire leurs coûts opérationnels et à améliorer l'efficacité de leur production grâce à une qualité fiable et à un service après-vente complet. Qu'il s'agisse de demandes techniques ou de besoins de maintenance, notre équipe d'experts répondra rapidement pour garantir que votre système de vannes maintient des performances optimales à tout moment.
Si vous êtes intéressé par nos produits, vous pouvez choisir de laisser vos informations ici et nous vous contacterons sous peu.
