Selecting a Top Entry Ball Valve Manufacturer for Cryogenic CNG, LNG and LPG Lines

Nov . 17, 2026 03:34

Choose a top entry ball valve manufacturer by matching service, temperature, connection, materials, actuation and inspection requirements. Our 1″ floating ball valve is configured for 150LB service at -196 ℃ with BW ends and manual or gear operation.

Selecting a Top Entry Ball Valve Manufacturer for Cryogenic CNG, LNG and LPG Lines
Illustration for reference; see the product page for actual photos and specifications.

1″

Size

150LB

Rating

BW as per ASME B16.25

End connection

-196 ℃

Temperature

1

Set the service and temperature first

A cryogenic valve selection starts with the fluid, design temperature and pressure rating. Our top-entry floating ball valve is configured for CNG, LNG and LPG service at -196 ℃, with a 1″ size, 150LB rating and BW ends. The general application list also includes CO2 and N2, so include the actual fluid in your inquiry.

The product range covers design temperatures from -196℃~120℃, sizes from 1/8″~36″, and pressure ratings from 150LB~4500LB, PN6~PN750. Use the exact configuration required by your line datasheet when comparing a supplier's quotation.

ParameterProduct configuration
Valve typeTop-entry cryogenic floating ball valve
Size1″
Rating150LB
End connectionBW as per ASME B16.25
Temperature-196 ℃
Body and bonnetA182 F316
BallASTM A182 F316+HF
StemASTM A182 F316
SeatPEEK or HF metal
ActuationManual and gear
2

Match the connection and materials

BW ends as per ASME B16.25 determine how this valve joins the piping. Give the supplier the required end connection, installation space and line size so the proposed configuration can be checked against the piping layout.

The configured body and bonnet use A182 F316, the ball uses ASTM A182 F316+HF, and the stem uses ASTM A182 F316. The seat is available in PEEK or HF metal. Ask the manufacturer to identify the selected seat and material designation in the quotation and valve documents.

Other connection and material combinations appear in the product range, including RF/RTJ, SW/NPT, and materials such as ASTM A351 CF8M, ASTM A182 F304 and MONEL K400/K500. Treat these as selection options for a different configuration, not as features of the 1″ valve listed above.

3

Choose the operator for the working arrangement

Manual and gear operation are available for this configuration. Select the operator that matches access, operating frequency and the control arrangement on your line. If the valve will connect to another control system, request the actuator and interface details with the quotation.

The product design description includes an anti-blowout stem, fire-proof design and anti-static design. Include any required safety design in the purchase specification so the supplier can identify it against the ordered configuration.

4

Check the manufacturer's inspection controls

A top entry ball valve manufacturer should connect the proposed configuration with material identification and inspection records. We carry out chemical analysis and mechanical testing on raw materials from each heat number, DPT testing with castings, and hydraulic testing of the shell and seal with a low-pressure air test. Partly MT or UT testing and RT are available when required.

Ask which inspection records will accompany your exact valve and identify the inspection norm required for the order. The product information names API598, API6D and BS6364 for inspection and approval. Low-emission testing and DNV, BV or SGS TPI service can be requested when the project requires them.

What to weigh

Service fitCNG, LNG, LPG, CO2 or N2 and design temperature
Size and rating1″, 150LB configuration for the line
ConnectionBW ends as per ASME B16.25
Materials and seatA182 F316 parts with PEEK or HF metal seat
Operator and inspectionmanual or gear operation, tests and inspection norm

Your shortlist

CNG LNG LPG top-entry cryogenic floating ball valve, 1″, 150LB, BW ends, -196 ℃

Select this configuration for a line matching its fluid, temperature, size, rating, BW ends, materials, seat and operator. Include inspection records and any TPI request in the quotation review.

Send a complete specification for quotation

Choose our CNG LNG LPG top-entry cryogenic floating ball valve when your line requires a 1″, 150LB floating-ball valve for -196 ℃ service, BW ends, and manual or gear operation. It suits a specification where the A182 F316 body and bonnet, ASTM A182 F316+HF ball, ASTM A182 F316 stem, and selected PEEK or HF metal seat meet the project requirements.

Send the fluid, design temperature, rating, size, end connection, seat choice, operator, inspection norm and any third-party inspection request with your inquiry. We can then align the proposed valve configuration with your line datasheet.

The company

SAVVY VALVES CO.,LTD.

Savvy Valves – Engineering Excellence in Valve Solutions for Global Industries As a globally recognized leader in industrial valve manufacturing, Savvy Valves (formerly International Machinery Development Inc.) combines decades of engineering expertise with cutting-edge production capabilities to deliver high-performance, reliable valve solutions for the world's most demanding applications.…

About Us ↗Visit company website ↗

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.