Butterfly Valves
-
PHOTO SHOWS SPECIFICATIONS AS BELOW
SIZE: 30″
RATING: 150LB
BODY: ASTM A216 WCB
DISC: ASTM A351 CF8M
STEM: SS316
SEAT: EPDM
ACTUATION: ELECTRIC ACTUATOR
-
Nominal Diameter (DN) DN50 ~ DN600 (Optional)
Nominal Pressure (PN) PN10/16 (Class 150), JIS 10K/16K
Temperature Range -20°C to +120°C (EPDM Seat)
-10°C to +180°C (PTFE Seat)
Applicable Media Water, Air, Oil, Weakly Corrosive Liquids
Connection Type Wafer-Type (ASME B16.5 / EN 1092-1/JIS B2220)
Actuation Lever, Gear, Pneumatic, Electric
-
PHOTO SHOWS SPECIFICATIONS AS BELOW
SIZE: 8″~14″
RATING: 200WOG
BODY: ASTM A216 WCB
DISC: ASTM A351 CF8
STEM: SS416 PINLESS
SEAT: NBR
ACTUATION: GEAR UNIT
-
SIZE: DN700
RATING: PN6
BODY: ASTM A536 65-45-12
DISC: ASTM A351 CF8M
STEM: SS416 PINLESS
SEAT: NBR
PAINTING: FLUORINE CARBON, C5-I
ACTUATION: GEAR UNIT
-
Size:4″
Rating:150LB
Ends: Lugged as per ANSI B16.5
Materials:
ASTM A216 WCB body
ASTM A182 F316L trims
Operator: ISO5211 mounting pad for actuator
-
PHOTOS SHOWS SPECIFICATIONS AS BELOW
SIZE: DN450
RATING: PN16
BODY: ASTM 536 DUCTILE IRON 65-45-12
DISC: ASTM A536 DUCTILE IRON 65-45-12+ENP
STEM: SS416 PINLESS
SEAT: EPDM
ACTUATION: GEAR UNIT
-
SAMPLE SPECIFICATIONS
SIZE: 26″
RATING: 1500LB
BODY: ASTM A105N
DISC: ASTM A182 F316
EXTENDED YOKE: ASTM A182 F5
STEM: SS416
SEAT: ASTM A182 F316
SEAL: SS316+GRAPHITE LAMINATED
ACTUATION: GEAR UNIT
-
Valve Type Centric Wafer Butterfly Valve
Nominal Size 28″ (DN700)
Pressure Rating 150LB (PN20)
Face-to-Face Length EN558 Series 20 (165 mm)
End Connection Wafer per ASME B16.47 B Drilling
Design Standard API 609, EN 593
Leakage Class EN 12266-1 Class A (Zero Leakage), API 598
-
Connection Type Wafer type (flangeless) for mounting between standard flanges
Flow Direction Bi directional
Disc Design Concentric disc with central stem, reducing turbulence and pressure drop
Sealing One piece moulded EPDM seat provides drop tight shut off (zero leakage) and compensates for minor disc misalignment
Stem Design Anti blowout stem with square drive top; lower stem bearing reduces friction and wear
Actuator Mounting ISO 5211 top flange for direct mounting of manual levers, gear operators, or actuators
Maintenance Simple, low maintenance design with field replaceable seat
-
Connection Type Wafer-type / flangeless design for installation between flanges
Flow Direction Bi-directional
Disc Design Concentric disc rotates on central axis, minimizing pressure drop and turbulence
Sealing Elastomer seat provides bubble-tight shut-off (zero leakage) and compensates for minor disc misalignment
Stem Design Anti-blowout square-driven stem with lower thrust bearing to reduce friction and prevent galling
Actuator Mounting ISO 5211 compliant top flange for direct actuator mounting
Maintenance Compact, lightweight design with reduced maintenance requirements
-
• Valve Design: API 609 Category B (Double Flanged, Double Offset)
• Pressure/Temperature Rating: ASME B16.34 Class 150
• Flange Drilling: ASME B16.47 Series A (MSS SP-44) / ASME B16.5 compatible
• Face-to-Face: Manufacturer’s standard for buried service, based on API 609
• Testing & Inspection: API 598 (Zero Leakage)
• Buried Service Extension: Designed per AWWA M44
-
Nominal Size 3″ (DN80)
Pressure Class Class 150LB (PN10/PN16)
Valve Type Concentric / Resilient Seated Butterfly Valve
Structure Fully Internal Lined
Connection Type Wafer or Lug
Design Standard API 609, MSS SP-67, ISO 5752
Face-to-Face API 609 Table 2 / ISO 5752 Series 20
Flange Standard ASME B16.5 Class 150
Testing Standard API 598 / ISO 5208 Rate A
Operation Lever / Gearbox / Pneumatic / Electric
A butterfly valve is a type of quarter-turn valve used to regulate, isolate, or start and stop fluid flow in a piping system. It consists of a circular disc or plate mounted on a rotating shaft. When the handle or actuator turns the shaft 90 degrees, the disc moves from a fully closed to a fully open position, allowing flow through the valve. The disc remains in the flow path even when open, which means there is always a slight pressure drop. Butterfly valves are known for their compact design, fast operation, and cost-effectiveness, especially in large-diameter pipelines. They come in various types, such as wafer, lug, and double or triple offset styles, depending on the pressure and sealing requirements. These valves are widely used in industries such as water treatment, HVAC, chemical processing, oil and gas, and food and beverage, due to their reliability, low maintenance, and easy installation.